COPPER & FIBER NETWORK TROUBLE SHOOTER - NaviTEK NT
- Now includes a touchscreen
- Network troubleshooter (copper/fiber)
- PoE, service detection and port information
- Real time display of network traffic
- Test storage and PDF reporting
- Cable tracing/distance to fault (TDR)
- Supports IDEAL AnyWARE App
MSRP $655 to $1,383
The new NaviTEK NT is a network tester for troubleshooting and maintenance of active and passive copper and fiber networks. Incorporating an improved graphical interface NaviTEK NT allows network technicians to pinpoint and solve network connectivity issues faster than ever before. Subsequently, tests can be saved as pdf reports and shared with colleagues and clients using the free IDEAL AnyWare™ app.
- *** Now includes a touchscreen ***
- Network troubleshooting - pinpoint and solve network connectivity issues quickly
- Network service detection - port info, IP/MAC addresses and operates on VLAN
- Monitor network traffic - real time display of broadcast network traffic
- Copper and fibre cable tests - wiremap, distance to fault, PoE, optical power indication
- Professional PDF reports - send them from the site using the free IDEAL AnyWARE app
Click here for the IDEAL AnyWARE app.
Test Mode Selection
A test mode selection is shown on the start screen allowing users to easily choose between Auto-detect, Cable, Switch and Network. Also in instances where switches are configured to deny any unapproved devices, the NaviTEK NT will now display LLDP/CDP port information when connected due to its passive testing mode.
Fiber Cabling Pass/Fail
The NaviTEK NT will indicate a Pass or Fail when testing fiber cabling. Clear color coded on screen indications of Pass (Green) and Fail (Red) help technicians judge optical Rx power level more easily, as well as eliminating any guess work for technicians with limited knowledge of optical levels. The Pass/Fail threshold simply needs to be defined by the user in Setup from the main network test screen.
Port & network summary info
Press the Autotest button to display summary information and allow for detailed inspection of network parameters.
VLAN detection & operation
Automatic detection of VLAN ID’s allows the user to configure NaviTEK NT for operation on a VLAN.
Real time display of broadcast network traffic shown as a percentage of port speed for the previous 60 minutes.
CDP/LLDP/EDP port information
Show port information using Cisco Discovery Protocol (CDP), Link Layer Discovery Protocol (LLDP) and Extreme Discovery Protocol (EDP).
Display list of IP and MAC addresses of every device connected to the network.
View network illustration to verify test results of each network component.
Today, network technicians have a broad selection of software troubleshooting tools at their disposal and whilst useful in certain situations and environments they do have limitations. NaviTEK NT on the other hand offers a comprehensive suite of test and troubleshooting functionality only found on dedicated hand-held testers:-
Copper and fiber test interfaces
Fast detection of link and IP information including duplex, speed, port ID, VLAN, DNS, DHCP, Gateway status and IP address
Detects services such as ISDN, POTS and PoE
Accurate wire mapping including length measurement and distance to fault
Rugged, compact design permits use in confined spaces
- Not susceptible to virus and malware attack
1 x NaviTEK NT test unit, 1 x Remote unit No. 1, 4 x AA dry cell batteries (non-rechargeable), 2 x Patch cables - 30cm, Cat. 5e STP, 1 x Quick reference guide, 1 x Carry case
Performs tests for copper cabling and networks, including:
Display network configuration - IPv4 /IPv6 compatible
- Advanced wiremap for miswires, split pairs, opens and shorts
- Distance to opens and shorts (TDR)
- PoE/PoE+ detection
- Tone generator for cable tracing
- Ping and Traceroute testing
- Hub blink for port identification
- DHCP client
- Switch detection - 10/100/1000 Mb/s
- User-exchangeable RJ45 inserts
- Support for up to 12 wiremap remotes
- Backlit color screen
NaviTEK NT Plus
1 x NaviTEK NT Plus test unit with touchscreen, 1 x remote unit No. 1, 1 x rechargeable power module 1 x PSU EU/UK/US adapters, 2 x patch cables - 30cm, Cat. 5e STP, USB Wi-Fi adapter, 1 x quick reference guide, 1 x carry case
Includes everything in the NaviTEK NT above as well as the following:
- Now includes a touchscreen
- Custom wiremap
- Autotest button performs a suite of network tests
- Network Probe provides detailed port and network information of each device
- Port identification using EDP/CDP/LLDP protocols
- VLAN detection and support
- Network scan
- Traffic utilisation bar graph
- Internal memory for 5000 test reports
- Generate test reports (PDF or CSV)
- Sent test reports from your mobile device using the free IDEAL AnyWARE App
NaviTEK NT Pro
1 x NaviTEK NT PRO test unit with touchscreen, 1 x Remote unit No. 1, 1 x Rechargeable Power Module 1 x PSU EU/UK/US adapters, 2 x Patch cables - 30cm, Cat. 5e STP, USB Wi-Fi adapter, 1 x Quick reference guide, 1 x Carry case
Includes everything in the NaviTEK NT Plus as well as the following:
- Fiber optic cable interface
- Logon using the 802.1x protocol
- Optical interface with power indication
Quick Reference Guide
Q: Which tester should I use if I require PING test with VLAN?
A: NaviTEK NT Plus or Pro
Q: Why does the NaviTEK NT not always detect my 2 meter long patch cable?
A: NaviTEK NT cable detection range is from 3m and above. Any shorter than 3m will not be detected persistently
Q: What software does NaviTEK NT require to generate PDF reports?
A: No software is required. PDF reports are generated from the tester
Q: Can NaviTEK II Plus & Pro be upgraded to NaviTEK NT Plus & Pro including PDF report generation and wireless report transfer?
A: Yes. By downloading the latest software from www.idealnetworks.net and purchasing the approved Wi-Fi adapter Edimax EW-7811Un. Please note the software upgrade will delete all jobs from the tester
Q: Does NaviTEK NT require a factory calibration?
A: No: the indications of optical power, voltage, length etc. are for troubleshooting only and do not need calibration
Q: Can NaviTEK NT Pro measure fiber attenuation?
A: No: The optical power indication is only for troubleshooting purposes. It is not a calibrated measurement with a calibrated source. Accurate attenuation measurement is not possible. A power meter and light source such as IDEAL’s FiberMASTER would be required
Q: Can I use other vendors’ SFP modules instead of IDEAL Networks?
A: Use of other vendors’ SFPs may be possible but is not guaranteed for correct operation, including optical power indication
Q: Can all Active Remotes be used with NaviTEK NT?
A: Yes. Active remotes No.2~ No.12 (part no. 150050) can be used for advanced wiremapping. However VDV II’s Active Remote CAN NOT be used with NaviTEK NT
Q: Why does NaviTEK NT feature user-exchangeable RJ45 ports?
A: Repetitive use wears the gold plating on all RJ45 contacts and this is accelerated when testing with PoE because of the electrical arcing. In addition the contacts are often bent and damaged when users insert RJ11/12 plugs or RJ45 plugs that are not completely crimped
Q: Are the reports supported by IDEAL Data Centre?
A: Not currently
Q: Why can’t I use a laptop PC instead of a NaviTEK NT?
A: Today, network technicians have a broad selection of software troubleshooting tools at their disposal and whilst useful in certain situations and environments they do have limitations. NaviTEK NT on the other hand offers a comprehensive suite of test and troubleshooting functionality only found on dedicated hand-held testers:-
- Copper and fiber test interfaces
- Fast detection of link and IP information including duplex, speed, port ID, VLAN, DNS, DHCP, Gateway status and IP address
- Detects services such as ISDN, POTS and PoE
- Accurate wire mapping including length measurement and distance to fault
- Rugged, compact design permits use in confined spaces
- Not susceptible to virus and malware attack
Q: Does the NaviTEK NT have a touchscreen ?
A: Yes, the Plus and Pro models have a new touchscreen.