COPPER & FIBRE NETWORK TROUBLE SHOOTER - NaviTEK NT

  • Now includes a touchscreen
  • Network troubleshooter (copper/fibre)
  • PoE, service detection and port information
  • Real time display of network traffic
  • Test storage and PDF reporting
  • Cable tracing/distance to fault (TDR)
  • Supports IDEAL AnyWARE App

RRP ex VAT £485 to £922

Buy Now
Distributors
Demo

Overview

Networks Rewards

If you purchase a NaviTEK NT Pro between October 1st 2018 and January 31st 2019, you will receive a free VDV II Plus (R158002). Visit promo.idealnwd.com for further details.

NaviTEK NT

The new NaviTEK NT is a network cable tester for troubleshooting and maintenance of active and passive copper and fibre networks. Incorporating an improved graphical interface NaviTEK NT allows network technicians to pinpoint and solve network connectivity issues faster than ever before. Subsequently, tests can be saved as pdf reports and shared with colleagues and clients using the free IDEAL AnyWare™ app.

  • *** Now includes a touchscreen ***
  • Network troubleshooting - pinpoint and solve network connectivity issues quickly
  • Network service detection - port info, IP/MAC addresses and operates on VLAN
  • Monitor network traffic - real time display of broadcast network traffic
  • Copper and fibre cable tests - wiremap, distance to fault, PoE, optical power indication
  • Professional PDF reports - send them from the site using the free IDEAL AnyWARE app

Click here for the IDEAL AnyWARE app.

Overview

Features

Test Mode Selection

A test mode selection is shown on the start screen allowing users to easily choose between Auto-detect, Cable, Switch and Network.  Also in instances where switches are configured to deny any unapproved devices, the NaviTEK NT will now display LLDP/CDP port information when connected due to its passive testing mode.

Fibre Cabling Pass/Fail

The NaviTEK NT will indicate a Pass or Fail when testing fibre cabling. Clear colour coded on screen indications of Pass (Green) and Fail (Red) help technicians judge optical Rx power level more easily, as well as eliminating any guess work for technicians with limited knowledge of optical levels. The Pass/Fail threshold simply needs to be defined by the user in Setup from the main network test screen.

Port & network summary info

Press the Autotest button to display summary information and allow for detailed inspection of network parameters.

 

VLAN detection & operation

Automatic detection of VLAN ID’s allows the user to configure NaviTEK NT for operation on a VLAN.

Ethernet utilisation

Real time display of broadcast network traffic shown as a percentage of port speed for the previous 60 minutes.

CDP/LLDP/EDP port information

Show port information using Cisco Discovery Protocol (CDP),  Link Layer Discovery Protocol (LLDP) and Extreme Discovery Protocol (EDP).

Netscan

Display list of IP and MAC addresses of every device connected to the network.

Network Probe

View network illustration to verify test results of each network component.

Applications

Today, network technicians have a broad selection of software troubleshooting tools at their disposal and whilst useful in certain situations and environments they do have limitations. NaviTEK NT on the other hand offers a comprehensive suite of test and troubleshooting functionality only found on dedicated hand-held testers:-

  • Copper and fibre test interfaces
  • Fast detection of link and IP information including duplex, speed, port ID, VLAN, DNS, DHCP, Gateway status and IP address
  • Detects services such as ISDN, POTS and PoE
  • Accurate wire mapping including length measurement and distance to fault
  • Rugged, compact design permits use in confined spaces
  • Not susceptible to virus and malware attack

 

Models

NaviTEK NT

NaviTEK NT

Kit Content

1 x NaviTEK NT test unit, 1 x Remote unit No. 1, 4 x AA dry cell batteries (non-rechargeable), 2 x Patch cables - 30cm, Cat. 5e STP, 1 x Quick reference guide, 1 x Carry case

Features

Performs tests for copper cabling and networks, including:
Display network configuration - IPv4 /IPv6 compatible

  • Advanced wiremap for miswires, split pairs, opens and shorts
  • Distance to opens and shorts (TDR)
  • PoE/PoE+ detection
  • Tone generator for cable tracing
  • Ping and Traceroute testing
  • Hub blink for port identification
  • DHCP client
  • Switch detection - 10/100/1000 Mb/s
  • User-exchangeable RJ45 inserts
  • Support for up to 12 wiremap remotes
  • Backlit colour screen

Product Number

R153001

Buy Now
Distributors
Distributors

RRP ex VAT £485

NaviTEK NT Plus

NaviTEK NT Plus

Kit Contents

1 x NaviTEK NT Plus test unit with touchscreen, 1 x remote unit No. 1, 1 x rechargeable power module 1 x PSU EU/UK/US adapters, 2 x patch cables - 30cm, Cat. 5e STP, USB Wi-Fi adapter, 1 x quick reference guide, 1 x carry case

Features

Includes everything in the NaviTEK NT above as well as the following:

  • Now includes a touchscreen
  • Custom wiremap
  • Autotest button performs a suite of network tests
  • Network Probe provides detailed port and network information of each device
  • Port identification using EDP/CDP/LLDP protocols
  • VLAN detection and support
  • Network scan
  • Traffic utilisation bar graph
  • Internal memory for 5000 test reports
  • Generate test reports (PDF or CSV)
  • Sent test reports from your mobile device using the free IDEAL AnyWARE App

Product Number

R151005

Buy Now
Distributors
Distributors

RRP ex VAT £727

NaviTEK NT Pro

NaviTEK NT Pro

Kit Contents

1 x NaviTEK NT PRO test unit with touchscreen, 1 x Remote unit No. 1, 1 x Rechargeable Power Module 1 x PSU EU/UK/US adaptors, 2 x Patch cables - 30cm, Cat. 5e STP, USB Wi-Fi adapter, 1 x Quick reference guide, 1 x Carry case

Features

Includes everything in the NaviTEK NT Plus as well as the following:

  • Fibre optic cable interface
  • Logon using the 802.1x protocol
  • Optical interface with power indication

Product Number

R151006

 

Buy Now
Distributors
Distributors

RRP ex VAT £922

Accessories

150050

Accessories

Remote
#2 - #12

Buy Now

RRP ex VAT £260

150054

Accessories

Active Remote # 1 for LanXPLORER, NaviTEK NT and SignalTEK NT

Buy Now

RRP ex VAT £29

150055

Accessories

RJ45 Patch Cable Kit - 2 x Patch Cables. 30cm Cat. 5e STP

Buy Now

RRP ex VAT £7

150056

Accessories

2m duplex multimode patch cable LC to LC

Buy Now

RRP ex VAT £16

150057

Accessories

2m duplex singlemode patch cable LC to LC

Buy Now

RRP ex VAT £16

150058

Accessories

RJ45 inserts and tool

Pack of 10 Replacement Samtec LifeJack inserts with Samtec LifeJack tool

Buy Now

RRP ex VAT £72

150059

Accessories

Remotes Half Kit

Set of five active remotes #2 to #6 incl 6 cables for LanXPLORER, NaviTEK NT and SignalTEK NT

Buy Now

RRP ex VAT £140

151051

Accessories

Mains adapter and battery charger 110/220V AC to 12V DC 2.5A with UK, Euro and US
adapters

Buy Now

RRP ex VAT £17

151052

Accessories

Battery module for NaviTEK NT and SignalTEK NT including 4 x Alkaline non-rechargeable cells

Buy Now

RRP ex VAT £40

151053

Accessories

Rechargeable NiMH Power Module for NaviTEK NT and SignalTEK NT

Buy Now

RRP ex VAT £57

151054

Accessories

Replacement Carry Case for NaviTEK NT

Buy Now

RRP ex VAT £41

33-963-10

Accessories

One-Click Fibre Cleaner STC-FC2.5mm

This 2.5mm One-click Cleaner is a high-performance and easy-to-use fibre tool that has been designed to clean both the male connector ends and female bulkhead adapters (ferrule end-faces inside the adapters). STC-FC2.5mm is suitable for FC, SC, and ST.

Features

  • Over 500 cleans per tool
  • Cleaning grade up to 95%~99.9%
  • For oil stains and water, the result is much better than traditional cotton swabs
  • Supports 2.5mm(FC, SC, ST)
  • Easy to use

RRP ex VAT £62

33-963-11

Accessories

One-Click Fibre Cleaner STC-FC-1.25mm

This 1.25mm One-click Cleaner is a high-performance and easy-to-use fibre tool that has been  designed to clean both the male connector ends and female bulkhead adapters (ferrule end-faces inside the adapters). STC-FC1.25 is available for LC and MU.

Features:

  • Over 500 cleans per tool
  • Cleaning grade up to 95%~99.9%
  • For oil stain and water, the result is much better than traditional cotton swabs
  • Supports 1.25mm (LC, MU)
  • Easy to use

RRP ex VAT £62

62-164

Accessories

Amplifier Probe

Buy Now

RRP ex VAT £57

MGKLX2

Accessories

GbE Fibre Kit LX

1000BASE-LX Fibre Kit. Includes 1310nm SFP Small Form factor Pluggable) LX transceiver, LC/LC and LC/SC duplex single-mode cables and SC/SC duplex adapter.

Buy Now

RRP ex VAT £167

MGKSX1

Accessories

GbE Fibre Kit SX

1000BASE-SX Fibre Kit. Includes 850nm SFP (Small Form factor Pluggable) SX transceiver, LC/LC and LC/SC duplex multimode cables and SC/SC duplex adapter.

Buy Now

RRP ex VAT £135

MGKZX3

Accessories

GbE Fibre Kit ZX

1000BASE-ZX Fibre Kit. Includes 1550nm SFP (Small Form factor Pluggable) ZX transceiver, LC/LC and LC/SC duplex single-mode cables and SC/SC duplex adapter.

Buy Now

RRP ex VAT £447

Downloads

FAQ

Q: Which tester should I use if I require PING test with VLAN?

A: NaviTEK NT Plus or Pro

Q: Why does the NaviTEK NT not always detect my 2 meter long patch cable?

A: NaviTEK NT cable detection range is from 3m and above. Any shorter than 3m will not be detected persistently

Q: What software does NaviTEK NT require to generate PDF reports?

A: No software is required. PDF reports are generated from the tester

Q: Can NaviTEK II Plus & Pro be upgraded to NaviTEK NT Plus & Pro including PDF report generation and wireless report transfer?

A: Yes. By downloading the latest software from www.idealnetworks.net and purchasing the approved Wi-Fi adapter Edimax EW-7811Un. Please note the software upgrade will delete all jobs from the tester

Q: Does NaviTEK NT require a factory calibration?

A: No: the indications of optical power, voltage, length etc. are for troubleshooting only and do not need calibration

Q: Can NaviTEK NT Pro measure fibre attenuation?

A: No: The optical power indication is only for troubleshooting purposes. It is not a calibrated measurement with a calibrated source. Accurate attenuation measurement is not possible. A power meter and light source such as IDEAL’s FiberMASTER would be required

Q: Can I use other vendors’ SFP modules instead of IDEAL Networks?

A: Use of other vendors’ SFPs may be possible but is not guaranteed for correct operation, including optical power indication

Q: Can all Active Remotes be used with NaviTEK NT?

A: Yes. Active remotes No.2~ No.12 (part no. 150050) can be used for advanced wiremapping. However VDVII’s Active Remote CAN NOT be used with NaviTEK NT

Q: Why does NaviTEK NT feature user-exchangeable RJ45 ports?

A: Repetitive use wears the gold plating on all RJ45 contacts and this is accelerated when testing with PoE because of the electrical arcing. In addition the contacts are often bent and damaged when users insert RJ11/12 plugs or RJ45 plugs that are not completely crimped

Q: Are the reports supported by IDEAL Data Centre?

A: Not currently

Q: Why can’t I use a laptop PC instead of a NaviTEK NT?

A: Today, network technicians have a broad selection of software troubleshooting tools at their disposal and whilst useful in certain situations and environments they do have limitations. NaviTEK NT on the other hand offers a comprehensive suite of test and troubleshooting functionality only found on dedicated hand-held testers:-

  • Copper and fibre test interfaces
  • Fast detection of link and IP information including duplex, speed, port ID, VLAN, DNS, DHCP, Gateway status and IP address
  • Detects services such as ISDN, POTS and PoE
  • Accurate wire mapping including length measurement and distance to fault
  • Rugged, compact design permits use in confined spaces
  • Not susceptible to virus and malware attack

Q: Does the NaviTEK NT have a touchscreen ?

A: Yes, the Plus and Pro models have a new touchscreen.