CABLE VERIFIERS - VDV II series
- Measures cable length
- Provides distance to fault (TDR)
- Identifies wiring errors instantly
- Determines services running: ISDN, PBX and PoE
- RJ-11, RJ-12, RJ-45 and COAX ports
RRP ex VAT £109 to £308
If you purchase a LanXPLORER Pro between October 1st 2016 and January 31st 2017, you will receive a free VDV II Pro. Visit promo.idealnwd.com for further details.
The new VDV II Series are easy to use cable testers that check the integrity of copper cables commonly found in domestic, commercial or industrial voice, data or video installations, including telephone wiring, data network and video/security cabling.
Employing state-of-the-art technology, VDV II offers functionality not previously available in a wiremapper. The advanced wiremap engine accurately displays complex wiring faults instantaneously whilst TDR (Time Domain Reflectometry) aids troubleshooting and improves on-site productivity.
The flagship VDV II Pro utilises TDR to accurately measure cable length and provide distance to fault information. TDR’s work by injecting a signal into the cable and measuring the time for any signal to be reflected back after encountering changes in impedance caused by cable damage, open and short circuits. The recorded time is then translated into an accurate distance measurement. TDR helps to pinpoint where cabling faults occur. This speeds up fault finding as well as minimising disruption and potential damage to fixtures and fixings.
With comprehensive details on faults such as opens, shorts, crossovers and split pairs, VDV II identifies wiring errors instantly. The integrated RJ-11/RJ-12 (voice), RJ-45 (data) and coax F-Type (video) connectors allow faster testing of most types of low-voltage cables by eliminating the need for separate testers or adapters.
Connection issues are not always associated with cable faults, so VDV II Pro has the capability to help identify service related issues. By detecting the presence of voltage and checking polarity, VDV II Pro quickly determines which media service is running over the cable, such as ISDN, PBX and PoE (Power over Ethernet) resulting in faster fault diagnosis. Troubleshooting active Ethernet networks is also made easier with in-built network detection that displays network rate and duplex information. Furthermore, to prevent potentially costly damage to the tester all VDV II’s are smart enough to know when they have been plugged into an outlet where voltage is present.
Support for 1, 2 or 3-pair RJ11/12 telephone testing cable.
Testing of shielded and unshielded Cat 5/5e/6/6a/7 LAN cable.
Tests coax cable through F-connector interface.
1 x VDV II, 1 x dual port remote unit, 1 x coax remote unit, 1 x alkaline battery, 1 x multi-language user guide.
Offers all standard copper testing including:
- Coax, 6Pin (RJ-11/12), 8Pin (RJ-45) Connectors for Copperr Cable Testing
- Wiremap for Miswires, Split Pairs, Shorts and Opens
- Analog Tone Generator
- Voltage Protection
- Shielded Cable Testing
- Single Screen Results
RRP ex VAT £109.00
VDV II Plus
1 x VDV II Plus, 1 x dual port remote unit, 1 x coax remote unit, 1 x alkaline battery, 1 x multi-language user guide, 2 x RJ45 to alligator clip cable 390mm, 2 x screened RJ45 to RJ45 cable 150mm, 2 x RJ11/12 to RJ11/12 cable 100mm, 1 x F-type plug to F-type plug cable 230mm, 1 x F-81 barrel splice, 1 x BNC female to F-type male adaptor, 1 x BNC female to F-type female adaptor, 1 x RCA female to F-type male adaptor, 1 x RCA female to F-type female adaptor, 1 x wallet wiring card, 1 x carry case.
All the features of the VDV II including:
- Larger 2.9" Display
- Hub Blink
- Cable Length
- Distance to Open
- Carry Case and Cables
RRP ex VAT £198.00
VDV II Pro
1 x VDV II Pro, 1 x dual port remote unit, 1 x coax remote unit, 1 x alkaline battery, 1 x multi-language user guide, 2 x RJ45 to alligator clip cable 390mm, 2 x screened RJ45 to RJ45 cable 150mm, 2 x RJ12 to RJ12 cable 100mm, 1 x F-type plug to F-type plug cable 230mm, 1 x F-81 barrel splice, 1 x BNC female to F-type male adaptor, 1 x BNC female to F-type female adaptor, 1 x RCA female to F-type male adaptor, 1 x RCA female to F-type female adaptor, 1 x wallet wiring card, 1 x carry case.
All the features of the VDV II, VDV II Plus and...
- Distance to Open / Short (TDR)
- PoE Detection with Voltage Information
- Media Service Detection
- Ethernet Detection with Network Rate and Duplex Information
RRP ex VAT £308.00
Q:Can VDV II series test Cat5e/6/6A/7 cables?
A: Yes VDV II can test the wiring of all common cable categories as well as Coaxial and telephone cables.
Q: What is the maximum length of data cable VDV II series can test?
A: 300m (980ft) for wiremap and 600m (1960ft) for overall length.
Q: Can VDV II series generate reports?
A: No, however IDEAL Networks have other products capable of reporting. Please visit www.idealnwd.com for more information.
Q: Do I need special patch cables to perform testing?
A: No, generic good quality patch cords can be used for testing.
Q: What battery does the VDV II series use?
A: VDV II series use standard 9v batteries.
Q: How many remotes can the VDV II series use?
A: 12 Remotes for wiremap and 24 port identifiers.
Q: What is a port identifier?
A: Port identifiers provide a ports number on the screen of a VDV II allowing for correct labelling of ports.
Q: Is the VDV II series safe against voltage overload?
A: Yes the VDV II series can withstand common PoE voltages and is protected up to 60v.
Q: Can VDV II PRO detect Gigabit speeds?
A: Yes, 1 Gb/s.
Q: Is there any technical support available?
A: Yes, we include comprehensive manuals with every VDV II and if you need further assistance we have the following technical hot lines: France: +33(0)169355471, Germany: +49(0)8999686200, UK: +44(0)1925444446
Q: Amplifier Probe
A: Product code 62-164