SureTrace® Circuit Tracer for UTP and Coaxial Tracing

03/03/2017

SureTrace® Circuit Tracer for UTP and Coaxial Tracing

TheSureTrace® circuit tracer from IDEAL Industries is an essential piece of kit for all network and data cable installers to use alongside their IDEAL Networks testers. This innovative circuit tracer avoids disruption or downtime by allowing you to trace UTP cables (such as Cat5e and Cat 6) in a live data rack without disconnecting the cables from the system. These results can be achieved in 5 simple steps:

  • Step 1: Plug Inductive clamp into the Battery Pack and clamp over the UTP or Coaxial cable being traced 
  • Step 2: Hang the battery pack on the rack using the magnetic strap 
  • Step 3: Turn on the unit and verify it is getting a strong signal from the transmitter
  • Step 4: Go to the rack where the other end of the cable is, and slowly scan this rack of cables with your receiver on the highest sensitivity 
  • Step 5: Check for the strongest signal, and thereby locate the cable required

Following a similar process to above, this advanced technology can also be used to identify the proper circuit breaker feeding the data rack. The SureTrace® provides four times the tracing power of conventional 9-volt circuit tracers on the market and can even be used to trace the DC power cables feeding the equipment in the rack.

SureTrace® is the only circuit tracer with Swivel Display™ technology and comes in three different kits: 61-955, 61-957 and 61-959. To find out more about the refined performance of SureTrace®, watch the short video here.

Recent articles

  • Need Help Testing Modular Plug Terminated Links? 09/18/2018

    IDEAL Networks explains answers common questions about the challenges of the testing and certification of Modular Plug Terminated Links.

    Read more
  • Why certify LAN cabling installation? 09/04/2018

    LAN cable certifiers are the go-to method of testing twisted pair cabling. But why do installers need to certify cabling? And what is the difference between a certifier and other types of LAN testers? Dan Barrera, Global Product Manager from IDEAL Networks explains.

    Read more
  • Free September Webinar: Troubleshooting Inactive Networks and Data Cabling 08/23/2018

    A free webinar from IDEAL Networks in September will help data cable installers and network technicians learn top troubleshooting tips for inactive networks and data cabling.

    Read more
  • August Security Camera Installation Webinar 08/10/2018

    IDEAL Networks is hosting a free security camera installation and testing webinar for network technicians in August 2018.

    Read more
  • New software update for testing MPTL with the LanTEK III Cable Certifier 08/09/2018

    IDEAL Networks is helping installers certify Modular Plug Terminated Links (MPTL) thanks to a new software update for its LanTEK III cable certifier.

    Read more