Six Ways to Troubleshoot in Local Area Networks

09/13/2016

Six Ways to Troubleshoot in Local Area Networks

As the LAN (Local Area Network) environment gets increasingly complex, IDEAL Networks has issued guidance to help technicians identify the source of errors more simply and get the most from their network troubleshooting tester.

“Network transmission media can be copper, fiber or wireless so network technicians need to be armed with troubleshooting tools that can tackle any problem they encounter,” explains Tim Widdershoven, Global Marketing Manager at IDEAL Networks.  “This makes it more challenging for technicians - if errors occur, these could be located in a wide range of different media and layers of the network.”

There are six ways that technicians can use a tester to effectively troubleshoot errors:

1.     Physical Faults in Network Cabling

Most common network errors are at a physical level, such as problems with copper or fiber optic cabling, so this should always be the first place a technician starts.  For copper cabling, a network troubleshooting tester should be able to locate faults anywhere along a cable link using TDR (time domain reflectometer) technology to pinpoint distance to common faults. A tester that checks individual conductors in the cable versus checking only paired conductors reduces the time required to identify and repair the fault. Typically cable testers display wiremap faults as a pair even when only one conductor is at fault. When checking optical fiber, a tester that accepts common optical SFP (small form pluggable) modules allows the user to quickly determine whether the cabling or the network equipment is at fault.

2.     Endpoint Network Testing

In this configuration the tester acts like any other device on the network yet it has the capability to monitor and detect problems that may not be visible when using software troubleshooting tools. An essential part of identifying the source of errors is understanding the Ethernet network.  This mode can verify that the network port to which the tester is connected has complete access to all network resources and can test for PoE (Power over Ethernet) when necessary.

3.     In-line

Dual port testers can be inserted between any two points in the network allowing it to monitor all data passing through that point. The device can show the type of Ethernet connection at the two ports and identify speed mismatches as well as detect and identify the source of network errors.  It can also be connected between the internet router and the network to measure data transfer rate to the internet.  In-line mode features such as Top 10 lists can also help detect devices that are using a particularly large amount of bandwidth.

4.     Network map

A network map feature provides an overview of all devices on a LAN.  For troubleshooting, saving this map and returning to it later can show where changes to a network have occurred.  For example, if a user can no longer access a particular server, the network map can show if the server is still accessible on the network.  If the troubleshooting tester has an integrated trace-route function, faulty routers can be identified in large LANs and even across WAN (wide area network) environments.

5.     VoIP

Diagnostic options for VoIP (Voice over IP) connections can also be helpful for troubleshooting.  The tester can be connected between a VoIP telephone and the network, measuring call quality of service (QoS) metrics to confirm reported call quality issues and identify the problem.

6.     Wi-Fi

Wi-Fi networks are particularly susceptible to problems and an access point (AP) can be the source of errors, although it appears to be working correctly.  A nearby AP may be utilizing the same channel, creating interference and reducing the range of the Wi-Fi network.  Using the in-line capability the tester can be connected between the AP and the network to monitor the combined traffic of all wireless devices. This may result in adding APs to increase bandwidth when demand exceeds the capacity of a single AP. In addition, the copper wire connecting the AP to the network could be faulty. 

The IDEAL Networks LanXPLORER Pro network troubleshooter provides technicians with a tester that simplifies troubleshooting, supports the versatility of modern networks and helps avoid downtime.

Recent articles

  • Need Help Testing Modular Plug Terminated Links? 09/18/2018

    IDEAL Networks explains answers common questions about the challenges of the testing and certification of Modular Plug Terminated Links.

    Read more
  • Why certify LAN cabling installation? 09/04/2018

    LAN cable certifiers are the go-to method of testing twisted pair cabling. But why do installers need to certify cabling? And what is the difference between a certifier and other types of LAN testers? Dan Barrera, Global Product Manager from IDEAL Networks explains.

    Read more
  • Free September Webinar: Troubleshooting Inactive Networks and Data Cabling 08/23/2018

    A free webinar from IDEAL Networks in September will help data cable installers and network technicians learn top troubleshooting tips for inactive networks and data cabling.

    Read more
  • August Security Camera Installation Webinar 08/10/2018

    IDEAL Networks is hosting a free security camera installation and testing webinar for network technicians in August 2018.

    Read more
  • New software update for testing MPTL with the LanTEK III Cable Certifier 08/09/2018

    IDEAL Networks is helping installers certify Modular Plug Terminated Links (MPTL) thanks to a new software update for its LanTEK III cable certifier.

    Read more