What’s New in the Latest NaviTEK NT Software Updates

12/10/2017

What’s New in the Latest NaviTEK NT Software Updates

The NaviTEK NT series of network troubleshooting testers has grown in popularity every year and the most recent software updates support this demand by offering extra functionality.

NaviTEK NT users can now expect a wider range of old and new switches, including those from Brocade, Huawei and CISCO to be supported.  With additional LLDP port decoding, this gives system integrators the ability to instantly see port information on the tester’s screen, including port number, VLAN, MAC address, description, IP address and more. Time is saved by intercepting LLDP/CDP/EDP frames during switch negotiation. The update also provides improved CDP/LLDP port discovery information decoding on VLAN or VoIP VLAN in Cisco, HP and Huawei switches.

In addition, customers using twisted pair cabling with non-standard connector terminations can now select which wires should be tested within the cable and NaviTEK NT will provide an accurate pass/fail wiremap result. This may be achieved through the extended list of wiremap templates for common cable types including non-standard cable, such as USOC, COAX, Profinet, ISDN and Deutsche Bahn. Users can also now create customised templates for wiremap testing. This can be beneficial when working with cable that has fewer than 8 wires, or where only some of the wires are used. Previously NaviTEK NT would have returned a fail result as its standard configuration would always attempt to test 8 wires. Now NaviTEK NT can test any customised/proprietary cabling system.

Following the software update release, it is also now possible for NaviTEK NT users to manually select the test mode they wish to use: cabling, network or switch. This can enable technicians to reduce test time by up to 1/3 as it is not necessary to wait for the device to auto-detect the test type. However, auto-detect is still available to provide users with the widest range of options.

Overall the NaviTEK NT updates offer enhanced accuracy of fault detection on complex wiremap issues, alongside bug fixes. 

Click here to download the free software updates for NaviTEK NT Plus or Pro.  Or, for more information on the range of data cable certifiers and network testers, visit our website.

Recent articles

  • Quick Setup Mode for LanTEK III® is Easy as 1,2,3 08/11/2018

    A new Quick Setup mode has been introduced to the LanTEK III Cable Certifier from IDEAL Networks, to help make your job as a cable installer easier and more efficient.  

    Read more
  • DTX Cable Certifier Trade-In Offer Extended! 29/10/2018

    Due to popular demand, IDEAL Networks will be extending the DTX cable certifier trade-in offer until 30th June 2019, giving you extra time to save up to £3,000 on a brand new LanTEK® III. 

    Read more
  • Free November Webinar: LanTEK III certifier upgrades that will make your job easier 24/10/2018

    The next free webinar from IDEAL Networks takes place on 14th November and will help data cable installers and network technicians learn about the latest enhancements to the LanTEK III cable certifier.

    Read more
  • New Quick Setup Cable Certifier from IDEAL Networks 23/10/2018

    Designed to support busy cable installers, the new Quick Setup mode on the latest version of the IDEAL Networks LanTEK III enables almost all configuration and testing to be performed on just one straightforward screen.

    Read more
  • Save more than £1,600 on Cable Testing Equipment with IDEAL Networks Rewards 11/10/2018

    Our Networks Reward end-of-year promotion is back, with some fantastic offers that could save you up to £1,615. 

    Read more