How Can a Cable Fail a Certification Test Yet Still Pass Data?

29/11/2017

How Can a Cable Fail a Certification Test Yet Still Pass Data?

A common question that comes up with certification is “how can a cable fail a certification test yet still pass data”? To answer this question, it is necessary to understand the differences between the performance requirements for various data speeds and cabling performance categories. The best place to start is the frequency requirements of each and the difference between frequency and data rate.

Data Rate

Data rate is the amount of data passed through the cable or network measured in megabits per second (Mb/s). Data rate is key metric in defining Ethernet speeds and is a function of the signalling frequency and the type of encoding used to create data bits. Common data rates available on twisted pair cabling are 10, 100, 1000 (1G) and 10G. 40G has just become available and 25G will be available shortly, though the distance is limited to 30 meters vs 100 meters with the other data rates.

Cable Frequency

Cable frequency is the frequency at which the cable is tested for certification. The difference between the cable frequency and data rate is due to the encoding used to create the data bits and the number of pairs used to transmit data.

Notice the discrepancies between the cable frequency and the data rate between the various types of Ethernet. 1000Base-T or 1G Ethernet is the most common application in use today and while it requires only Class D cabling to operate most people are installing class E or EA cabling which are certified to 250 and 500 MHz respectively. Therefore, the cabling is being tested at up to 5x the speed that is required for the network to operate properly. In this scenario, a cable can fail a certification test for Class E/EA and still work perfectly fine on a 1000Base-T network because of the significant difference in what is tested vs the minimum operating requirements. In short, many assume Class E/Cat 6 cable is required to support 1G data when in fact Class D/Cat 5e is all that Is required.

In Conclusion

The most common reason for the difference in the class of installed cabling and the data rate of the network equipment being used is to prepare for future applications. Today, the cost of 10G switches still hover around $300 per port while 1G switches cost $5-10 per port. 10G is still too costly for use at every work station and is limited mostly to data centres, but the cost difference between Class E and EA cabling is small enough that many organisations will pay for the better cabling to ensure they can migrate to 10G networks when the costs come down in the future. So even though a 1G network will run fine on poor quality Class EA cabling today, the infrastructure must be designed and tested to support future applications when organisations are ready to deploy them.

Recent articles

  • Cerberus Systems proves data cable terminations are right first time with IDEAL 17/05/2018

    The speed and accuracy of terminating cat5e and cat6 data cables with RJ45 plugs has been improved for electrical contractor Cerberus Systems thanks to the new FT-45® Feed Thru Modular Plugs and Crimp Tool from IDEAL.

    Read more
  • Trade-in your DTX cable certifier for a new LanTEK III and save up to £3,000! 14/05/2018

    At IDEAL Networks, we understand the importance of receiving trusted and consistent support for your cable certifiers. That’s why we are helping DTX customers upgrade to a brand new LanTEK III with a trade-in discount that could also save you up to £3000*. 

    Read more
  • IDEAL Networks forms distribution agreement with Mayflex 08/05/2018

    IDEAL Networks has formed an agreement with Mayflex, the distributor of Converged IP Solutions, to distribute several products from its cable certification and security portfolio. 

    Read more
  • Updated SignalTEK CT Cable Transmission Tester for Speed and Accuracy 26/04/2018

    SignalTEK CT is an affordable and innovative solution for user-friendly cable transmission testing.  With features such as Gigabit performance testing to the required Ethernet standards and advanced wiremapping with TDR fault location, SignalTEK CT offers fast and flexible testing. 

    Read more
  • New Software Updates for the SignalTEK NT Network Transmission Tester 19/04/2018

    IDEAL Networks is always looking for new ways to simplify network transmission testing. Our new software update for the popular SignalTEK NT network transmission tester is designed to give you more flexibility and efficiency than ever before.

    Read more