SureTrace® Circuit Tracer for UTP and Coaxial Tracing

03/03/2017

SureTrace® Circuit Tracer for UTP and Coaxial Tracing

TheSureTrace® circuit tracer from IDEAL Industries is an essential piece of kit for all network and data cable installers to use alongside their IDEAL Networks testers. This innovative circuit tracer avoids disruption or downtime by allowing you to trace UTP cables (such as Cat5e and Cat 6) in a live data rack without disconnecting the cables from the system. These results can be achieved in 5 simple steps:

  • Step 1: Plug Inductive clamp into the Battery Pack and clamp over the UTP or Coaxial cable being traced 
  • Step 2: Hang the battery pack on the rack using the magnetic strap 
  • Step 3: Turn on the unit and verify it is getting a strong signal from the transmitter
  • Step 4: Go to the rack where the other end of the cable is, and slowly scan this rack of cables with your receiver on the highest sensitivity 
  • Step 5: Check for the strongest signal, and thereby locate the cable required

Following a similar process to above, this advanced technology can also be used to identify the proper circuit breaker feeding the data rack. The SureTrace® provides four times the tracing power of conventional 9-volt circuit tracers on the market and can even be used to trace the DC power cables feeding the equipment in the rack.

SureTrace® is the only circuit tracer with Swivel Display™ technology and comes in three different kits: 61-955, 61-957 and 61-959. To find out more about the refined performance of SureTrace®, watch the short video here.

Recent articles

  • New ownership for IDEAL Networks to “accelerate innovation and growth” 07/01/2019

    CBPE Capital (“CBPE”) has acquired a majority ownership position in IDEAL Networks, a market leading provider of portable handsets for data cable and network testing, validation and certification.  CBPE is acquiring the business from its former parent, IDEAL INDUSTRIES Inc and will be investing alongside the incumbent management team led by Paul Walsh, CEO. Terms of the transaction have not been disclosed.

    Read more
  • Partner Finder Upgrade Simplifies Certification 11/12/2018

    All new LanTEK® III data cable certifiers from IDEAL Networks will now feature a helpful Partner Finder feature to save time, reduce guesswork and simplify cable installation and troubleshooting.

    Read more
  • JPR Engineering maximises time and cost effectiveness of CCTV installation 27/11/2018

    JPR Engineering Services Ltd is saving time and improving cost effectiveness on CCTV installation jobs, thanks to the SecuriTEST IP® multi-function CCTV tester from IDEAL Networks.

    Read more
  • Quick Setup Mode for LanTEK III® is Easy as 1,2,3 08/11/2018

    A new Quick Setup mode has been introduced to the LanTEK III Cable Certifier from IDEAL Networks, to help make your job as a cable installer easier and more efficient. 

    Read more
  • New Quick Setup Cable Certifier from IDEAL Networks 23/10/2018

    Designed to support busy cable installers, the new Quick Setup mode on the latest version of the IDEAL Networks LanTEK III enables almost all configuration and testing to be performed on just one straightforward screen.

    Read more