Six Ways to Troubleshoot in Local Area Networks

13/09/2016

Six Ways to Troubleshoot in Local Area Networks

As the LAN (Local Area Network) environment gets increasingly complex, IDEAL Networks has issued guidance to help technicians identify the source of errors more simply and get the most from their network troubleshooting tester.

“Network transmission media can be copper, fiber or wireless so network technicians need to be armed with troubleshooting tools that can tackle any problem they encounter,” explains Tim Widdershoven, Global Marketing Manager at IDEAL Networks.  “This makes it more challenging for technicians - if errors occur, these could be located in a wide range of different media and layers of the network.”

There are six ways that technicians can use a tester to effectively troubleshoot errors:

  • 1.     Physical Faults in Network Cabling

Most common network errors are at a physical level, such as problems with copper or fiber optic cabling, so this should always be the first place a technician starts.  For copper cabling, a network troubleshooting tester should be able to locate faults anywhere along a cable link using TDR (time domain reflectometer) technology to pinpoint distance to common faults. A tester that checks individual conductors in the cable versus checking only paired conductors reduces the time required to identify and repair the fault. Typically cable testers display wiremap faults as a pair even when only one conductor is at fault. When checking optical fiber, a tester that accepts common optical SFP (small form pluggable) modules allows the user to quickly determine whether the cabling or the network equipment is at fault.

  • 2.     Endpoint Network Testing

In this configuration the tester acts like any other device on the network yet it has the capability to monitor and detect problems that may not be visible when using software troubleshooting tools. An essential part of identifying the source of errors is understanding the Ethernet network.  This mode can verify that the network port to which the tester is connected has complete access to all network resources and can test for PoE (Power over Ethernet) when necessary.

  • 3.     In-line

Dual port testers can be inserted between any two points in the network allowing it to monitor all data passing through that point. The device can show the type of Ethernet connection at the two ports and identify speed mismatches as well as detect and identify the source of network errors.  It can also be connected between the internet router and the network to measure data transfer rate to the internet.  In-line mode features such as Top 10 lists can also help detect devices that are using a particularly large amount of bandwidth.

  • 4.     Network map

A network map feature provides an overview of all devices on a LAN.  For troubleshooting, saving this map and returning to it later can show where changes to a network have occurred.  For example, if a user can no longer access a particular server, the network map can show if the server is still accessible on the network.  If the troubleshooting tester has an integrated trace-route function, faulty routers can be identified in large LANs and even across WAN (wide area network) environments.

  • 5.     VoIP

Diagnostic options for VoIP (Voice over IP) connections can also be helpful for troubleshooting.  The tester can be connected between a VoIP telephone and the network, measuring call quality of service (QoS) metrics to confirm reported call quality issues and identify the problem.

  • 6.     Wi-Fi

Wi-Fi networks are particularly susceptible to problems and an access point (AP) can be the source of errors, although it appears to be working correctly.  A nearby AP may be utilizing the same channel, creating interference and reducing the range of the Wi-Fi network.  Using the in-line capability the tester can be connected between the AP and the network to monitor the combined traffic of all wireless devices. This may result in adding APs to increase bandwidth when demand exceeds the capacity of a single AP. In addition, the copper wire connecting the AP to the network could be faulty. 

The IDEAL Networks LanXPLORER Pro network troubleshooter provides technicians with a tester that simplifies troubleshooting, supports the versatility of modern networks and helps avoid downtime. 

Recent articles

  • Updated SignalTEK CT Cable Transmission Tester for Speed and Accuracy 26/04/2018

    SignalTEK CT is an affordable and innovative solution for user-friendly cable transmission testing. With features such as Gigabit performance testing to the required Ethernet standards and advanced wiremapping with TDR fault location, SignalTEK CT offers fast and flexible testing. 

    Read more
  • New Software Updates for the SignalTEK NT Network Transmission Tester 19/04/2018

    IDEAL Networks is always looking for new ways to simplify network transmission testing. Our new software update for the popular SignalTEK NT network transmission tester is designed to give you more flexibility and efficiency than ever before.

    Read more
  • NaviTEK NT Improves Network Troubleshooting Even More 12/04/2018

    The IDEAL Networks NaviTEK NT Plus and Pro network troubleshooters are set to make troubleshooting copper and fibre networks easier than ever before following a free software update. 

    Read more
  • VoIP troubleshooting – LanXPLORER PRO reviewed 05/04/2018

    When issues arise on VoIP systems it can disrupt conversations and impact voice quality.  Luckily, our test equipment can be used to measure key factors that impact network performance and VoIP quality, ensuring effective troubleshooting.

    Read more
  • How performance testing applies to security, alarm, and control systems, as well as voice and data systems 03/04/2018

    When it comes to performance testing, voice/data and security alarm or access control systems are becoming increasingly difficult to distinguish from each other. Data performance testers can now be used to test the data handling capabilities or cabling, no matter what the application. This is due to the current process of moving these systems over to Ethernet/IP.

    Read more