SureTrace® Circuit Tracer for UTP and Coaxial Tracing

03/03/2017

SureTrace® Circuit Tracer for UTP and Coaxial Tracing

TheSureTrace® circuit tracer from IDEAL Industries is an essential piece of kit for all network and data cable installers to use alongside their IDEAL Networks testers. This innovative circuit tracer avoids disruption or downtime by allowing you to trace UTP cables (such as Cat5e and Cat 6) in a live data rack without disconnecting the cables from the system. These results can be achieved in 5 simple steps:

  • Step 1: Plug Inductive clamp into the Battery Pack and clamp over the UTP or Coaxial cable being traced 
  • Step 2: Hang the battery pack on the rack using the magnetic strap 
  • Step 3: Turn on the unit and verify it is getting a strong signal from the transmitter
  • Step 4: Go to the rack where the other end of the cable is, and slowly scan this rack of cables with your receiver on the highest sensitivity 
  • Step 5: Check for the strongest signal, and thereby locate the cable required

Following a similar process to above, this advanced technology can also be used to identify the proper circuit breaker feeding the data rack. The SureTrace® provides four times the tracing power of conventional 9-volt circuit tracers on the market and can even be used to trace the DC power cables feeding the equipment in the rack.

SureTrace® is the only circuit tracer with Swivel Display™ technology and comes in three different kits: 61-955, 61-957 and 61-959. To find out more about the refined performance of SureTrace®, watch the short video here.

Recent articles

  • ISG Technology saves time and money on network troubleshooting 04/09/2019

    ISG Technology, a network service business, has experienced benefits beyond cost effectiveness and time saving, when installing cables and network troubleshooting, with the IDEAL Networks handheld NaviTEK NT Pro.

    Read more
  • Frequently asked questions about our change in ownership 03/27/2019

    IDEAL Networks began the new year by announcing the exciting news that the business is now under new ownership. This positive change is set to help IDEAL Networks thrive and accelerate growth, and with several new product launches set for 2019, the timing couldn’t be better.

    Read more
  • LanTEK III Certifier Approved by Belden for 4K UHD Media Cable Testing 02/07/2019

    The latest IDEAL Networks LanTEK® III cable certifier has received a new, free software update which has been approved by Belden for testing 4K UHD media cabling.

    Read more
  • 3 Benefits of the New LanTEK III Partner Finder Feature 12/27/2018

    IDEAL Networks has added a helpful Partner Finder feature for all new LanTEK® III data cable certifiers to support busy installers and simplify the cable installation and troubleshooting process. 

    Read more
  • Partner Finder Upgrade Simplifies Certification 12/11/2018

    All new LanTEK® III data cable certifiers from IDEAL Networks will now feature a helpful Partner Finder feature to save time, reduce guesswork and simplify cable installation and troubleshooting.

    Read more