IDEAL Networks issues new guidance on MPTL testing

07/25/2018

IDEAL Networks issues new guidance on MPTL testing

Modular Plug Terminated Links (MPTL) are increasingly used in networks, but as testing is still relatively new it can present a challenge. IDEAL Networks has published a new, free White Paper to educate installers on the testing and certification of MPTLs.

“Although an MPTL is essentially just an Ethernet cable with a female socket (jack) on one side and a male plug on the other, testing is not simple and not the same as a Permanent Link (PL),” explains Tim Widdershoven, Global Marketing Manager for IDEAL Networks. “A PL has a female socket at each end and can be tested with approved certifier test leads using qualified male RJ45 plugs. However, because an MPTL has a male plug at one end, the certifier must be equipped with a female socket to test the plug performance.”

“You might assume that all you need to do to test MPTLs is change the adapters on the certifier but it’s not that simple - measuring the performance of the plug at the end of the MPTL takes special care,” Tim adds. “That’s where our new White Paper can help.”

The White Paper “The Rise of Modular Plug Terminated Links” from IDEAL Networks provides in-depth information about how MPTLs work. It also covers the pitfalls to be avoided during installation and testing, as well as looking at Permanent Links, LAN Cable Standardization and Testing Channels. The handy guide also highlights upcoming changes to the TIA-568.2-D Standard (part of the TIA-568 series), which will include MPTL as a recognised cabling topology.

For accurate MPTL testing, installers need to use a channel adapter which uses the specific ‘centred’ socket required for the certification of plugs. While some certifiers require the user to purchase an expensive patch cord test adapter or test cord, the IDEAL Networks standard cat.6A channel adapter already uses the centred socket with no special components.

What’s more, to support installers and technicians with the certification of MPTL, IDEAL Networks has developed a software update for the LanTEK III cable certifier, which is available to download for free from the company website.

“We simply want to provide the simplest and most cost-effective solution to help installers and certifiers overcome the challenges associated with MPTL testing,” says Tim.

To download the free White Paper ‘The Rise of Modular Plug Terminated Links (MPTLs)’ or to obtain the free MPTL software update, visit www.idealnetworks.net.

Recent articles

  • Partner Finder Upgrade Simplifies Certification 12/11/2018

    All new LanTEK® III data cable certifiers from IDEAL Networks will now feature a helpful Partner Finder feature to save time, reduce guesswork and simplify cable installation and troubleshooting.

    Read more
  • JPR Engineering maximises time and cost effectiveness of CCTV installation 11/27/2018

    JPR Engineering Services Ltd is saving time and improving cost effectiveness on CCTV installation jobs, thanks to the SecuriTEST IP® multi-function CCTV tester from IDEAL Networks.

    Read more
  • Act now to claim your free IDEAL Networks cable or network tester 11/21/2018

    There is still time to qualify for a free cable tester or network tester with the Networks Reward promotion from IDEAL Networks, running until January 2019 only.

    Read more
  • Quick Setup Mode for LanTEK III® is Easy as 1,2,3 11/08/2018

    A new Quick Setup mode has been introduced to the LanTEK III Cable Certifier from IDEAL Networks, to help make your job as a cable installer easier and more efficient. 

    Read more
  • New Quick Setup Cable Certifier from IDEAL Networks 10/23/2018

    To support fast and straightforward cable certification, IDEAL Networks has updated its LanTEK® III Cable Certifier with a new Quick Setup feature.

    Read more